Modified Wharram Pahi 42 with cabin.
The catamaran was build in Germany.
She was first launched in 2007 near Karlsruhe in the river Rhine.
Since then sailed in the Netherlands.
She is well equipped and ready to sail.
Now can be viewed ashore in the Ijsselmeer.
Hulls & decks etc +
The hulls are build from Epoxy/Plywood/Timber.
With a standing height of 1.90 meter.
The cabin is Sandwich Epoxy with Foam core.
Standing height in the cabin is 1.70 meter.
There are two large double berth in each hull.
Rig & Rigging +
Selden Mast with a length of 15.5 meter and beam with kicker and Lazy Jacks.
Dyneem DynaOne HS backstay.
Sails +
Main Sail with an area of 43 m2, triradial with 5 battens.
The Genua has 42 m2.
Storm Jib.
Engines +
2 x Yamaha 9.9 hp long shaft from 2014/2015 with few hours
Ground tackle +
CQR anchor 27 kg with 50 meter anchor chain.
CQR anchor stainless steel 15 kg with anchor rope
Danforth anchor
Electrical & Nav +
Furuno GPS Navigator GP-31
Raymarine ST60 Wind, Log and Depth sounder
EasyAIS with EasyAIS splitter
Navman VHF 7100 Radio
Bohlken Westerland Marine Barograph
Raymarine Radar (Antenna currently not installed)
Compass Ritchie
C-Map Charts until Canarian-Islands with board Computer
2x 100 Watt Solar Panels (2017)
2x 100 amp Gel Batteries 12V
Rutland 913 Windcharger (currently not installed)
Pioneer Radio with 6 speakers (two outside)
220 Volt Charger
Safety Gear +
EPIRB Ocean Signal
XM Liferaft for 4 person (needs service)
Two fire-extinguisher
Electrical bilge pumps
Galley +
2 flame gas burner
Double sink
Cooling box Coolmatic FA-40 37.5 L (346 x 271 x 400 mm inner dimensions). Old and ugly but working well
There are 300 Liter of fresh water tanks split under the berth in each hull and 120 Liter of grey water tanks.
In one of the fresh water tanks the sealing paint had a small leakage. I opened it and dried and treated the wood. Currently we use cans but the water pumps and pipes are still there.
Heads +
Jabsco manual sea toilet and sink
Dinghy +
Mini Bombard AX (needs some patches)
Suzuki 2hp 2stroke outboard.
Owners comments +
The under water hulls had been new coated in 2018 with 3 layers of Jotun Penguard HB Coat
Plus new Antifouling that should last for the next 5 years.
General condition is good.
She is registered in Germany with VAT paid.
Current location ashore in Ijsselmeer.
1
Boat details are supplied by the owners & cannot be guaranteed by SBM. You must verify those details personally, or employ a Marine Surveyor before purchase.