Click on thumbnails for larger version

From the owner:  SEARUNNER 44 CATAMARAN, DESIGNER , JIM BROWN

BUILDER:
Boatshop Philipines, boat shell & wing mast.
Boat completed by owner 1996. Hull construction "constant camber" vacuum laminated luan Mahogany veneers/epoxy. Wing mast (Nick Barlow) plywood/carbon fiber/epoxy.

Length44'
Beam 25' 3"
Draft 3' 4"
Displacement 19,0000 LBS, Payload 8,000 LBS
Sail area 760 SQ FT Wing mast sloop

Sails:
 Neil Pryde, full batten main 500 sq ft, jib 200 sq ft, storm jib 100sq ft, cruise spinnaker 1,200 sq ft.
 Std. Rigging:
 1 x 19 s/s 12mm & 10mm wire / stalock terminals
 winches (6) adersen self-tailing
 Engine:
 Yanmar 3jh2e diesel 3 cly 38hp
 prop shaft swing type, prop can be raised& lowered
 fuel cap. 240 litres
 Anchor gear:
 Goiot hand windlass 2 speed,
200' 3/8 chain,
44lb bruce anchor,
Fortress anchor 24 lb /w 200' 5/8" ,
45lb plow anchor
Parachute sea anchor /w >600' 5/8" line

Water:
Watertank 320 litres, 2 tanks
Watermaker 6 gal /hr 140 gal day
Electrical:
 100 amp balmar /w smart reg, 400 amp hour batt (12 volt)
Electronics:
Hf transceiver, vhf, gps, depth sounder, speed log, autopilot, 406 epirb
 berths 2 king size & 2 q-berth
Galley:
Force 10, 2 burner stove.
12v colmachine,
4 cu ft fridge.
 Heads:
2, lavac heads each /w vanity & sink
Dinghy:
11'6' ply/epoxy /w 3hp outboard

Contact Scott Brown

ASKING PRICE USD $95,000 SOLD

All details are as supplied by the owner and must be verified before purchase.